Kyocera ECOSYS M6030cdn

3-11
Preparation before Use > Loading Paper
3
Specify the media type.
1 [▲] [  ] key > [ Cassette 1 (to 4) Type ] > [ OK ] key
2 Select the media type, and select the [ OK ] key.
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting)
Specify the paper size and media type of paper to be used in the multi purpose tray.
1
Display the screen.
[ System Menu/Counter ] > [▲] [  ] key > [ Common Settings ] > [ OK ] key > [▲] [  ] key >
[
Orig./Paper Set. ] > [ OK ] key > [▲] [  ] key > [ MP Tray Set. ] > [ OK ] key
2
Specify the paper size.
1 [▲] [  ] key > [ MP Tray Size ] > [ OK ] key
2 Select the paper size, and select the [ OK ] key.
3
Specify the media type.
1 [▲] [  ] key > [ MP Tray Type ] > [ OK ] key
2 Select the media type, and select the [ OK ] key.
Item Description
MP Tray Size Available options are as follows:
Value: A4, A5, A6, B5, B6, Folio, 216 × 340 mm, Letter, Legal, Statement, Executive, Oficio II,
16K, ISO B5, Envelope #10, Envelope #9, Envelope #6, Envelope Monarch, Envelope DL,
Envelope C5, Hagaki (Cardstock), Oufuku Hagaki (Return postcard), Youkei 4, Youkei 2,
Custom
*1
*1 For instructions on how to specify the custom paper size, refer to the following:
Custom PaperSize (page 8-9)
MP Tray Type
*2
*2 To change to a media type other than "Plain", refer to the following:
MP Tray Set. (MP Tray Settings) (page 8-11)
Select the media type.
Values: Plain (60 to 105 g/m
2
), Transparency, Rough, Vellum (60 to 105 g/m
2
), Labels, Recycled,
Preprinted
*3
, Bond, Cardstock, Color, Prepunched
*3
, Letterhead
*3
, Envelope,
Thick (106 to 220 g/m
2
), Coated, High Quality, Custom 1-8
*3 To print on preprinted or prepunched paper or on letterhead, refer to the following:
SpecialPaper Act. (page 8-10)
NOTE
• The available media types for printing received faxes are as shown below.
Plain, Label, Recycled, Bond, Vellum, Color, Envelope, Cardstock, Coated, Thick, High Quality, Rough and Custom
1 to 8
• Set the paper size of the multi purpose tray used for fax reception as follows:
Inch models: Letter, Legal, Statement
Metric models: A4, B5, A5, Folio
If the above setting is changed, it will not be possible to print faxes.