5-36
Operation on the Machine > Using a Custom Box
Editing Documents
This function allows you to move documents stored in custom boxes into other boxes. The procedure for moving
documents is explained below.
1
Display the screen.
1
[
Document Box/USB
] key > [▲] [▼] key > [
Custom Box
] > [
OK
] key
2
Select the box containing the document you want to move, and select the [
OK
] key.
2
Move the documents.
1
Select the document you want to move, and select [
Select
].
A checkmark will be placed on the right of the selected file.
Select the checkmarked file and select [Select] again to cancel the selection.
2
[
OK
] key > [▲] [▼] key > [
Move
] > [
OK
] key
3
Select the destination box, and the [
OK
] key.
The selected document is moved.
• If a custom box is protected by a password, enter the correct password.
•Select [
Menu
] to perform the following operations.
- [
Open
]: Open the selected box.
- [
Detail
]: Display the details for the selected box.
- [
Sort(No.)
], [
Sort(Name)
]: Sort the boxes.
- [
Search(No.)
], [
Search(Name)
]: Search using the box number or the box name.
Select [
Menu
] to perform the following operations.
• [
Select All
]: Select all files.
• [
Clear All
]: Cancel all the file selections.
• [
Search(Name)
]: Search using a file name.
• [
Detail
]: Display the details for the selected file.
If the box to which the document is to be moved is protected by a password, enter the
correct password.
To Next Page
Loading...
