2-34
Installing and Setting up the Machine > Installing Software
Setting WIA Driver
Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7.
1
Display the screen.
1
Click [
Start
] button on the Windows and enter [
Scanner
] in [
Program and File Search
].
Click [
View scanners and cameras
] in the search list then the Scanners and Cameras
screen appears.
2
Select the same name as this machine from WIA Drivers, and click [
Properties
].
2
Configure WIA Driver.
In Windows 8, click [
Search
] in charms, and enter "View scanners and cameras" in the
search box. Select [
View scanners and cameras
] in the search list then the Scanners
and Cameras screen appears.
1
2
5
3
4
(Network)
(USB)
1
2
3
4
1 Click the [Settings] tab.
2 Enter the machine IP addresses or host name.
3 When using SSL, select the checkbox beside
SSL.
4 Set units of measurement.
5 Click [OK].
1 Click the [Settings] tab.
2 Set the Compression Level.
3 Set units of measurement.
4 Click [OK].
To Next Page
Loading...
