3-29
Preparation before Use > Registering Destinations in the Address Book
Adding a Destination on One Touch Key (One Touch
Key)
Assign a new destination (contact or group) to an one touch key. A maximum of 22 destinations can be registered.
1
Select the One Touch Key to be registered.
1
In the Send or FAX screen, press the One Touch Key that you want to register and hold it
(2 seconds or more).
2
[▲] [
] key > key number > [
OK
] key
Select a One Touch Key number with no registered destination.
2
Select the destinations.
1
Select the destination (contact or group) you want to register to the One touch key from the
Address Book.
2
Select the destination to be registered to the One touch key from the destinations
registered in the addresses and select the [
OK
] key.
The destination will be added to the One Touch Key.
• Numbers 1 to 11 are the One Touch Key numbers while the [
Shift Lock
] indicator is switched off. Numbers 12 to 22
are the One Touch Key numbers while the [
Shift Lock
] indicator is switched on by selecting the [
Shift Lock
] key.
• Refer to the following for use of One Touch Key.
Specifying Destination (page 5-15)
• You can add One Touch keys and change their settings on Command Center RX.
Registering Destinations (page 2-48)
To Next Page
Loading...
