6-20
Using Various Functions > Functions
Combine
Combines 2 or 4 original sheets into 1 printed page.
You can select the page layout and the type of boundary lines around the pages.
The following types of the boundary lines are available.
Select [
2 in 1
] or [
4 in 1
], select [
Detail
], and configure the function.
Item Value Description
Off
― Disables the function.
2 in 1
― Select the [
OK
] key to copy the original with the default setting. For the default
settings, refer to the following:
Function Defaults (page 8-13)
2 in 1 Layout
L to R T to B,
R to L
Select the page layout of scanned originals, and select the [
OK
] key.
Border Line
None,
Solid Line,
Dotted Line,
Positioning Mark
Select the page boundary line, and select the [
OK
] key.
Orig. Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [
Top Edge on Top
] or [
Top Edge on
Left
]. Then select the [
OK
] key.
4 in 1
― Select the [
OK
] key to copy the original with the default setting. For the default
settings, refer to the following:
Function Defaults (page 8-13)
4 in 1 Layout
Right then Down,
Down then Right,
Left then Down,
Down then Left
Select the page layout of scanned originals, and select the [
OK
] key.
Border Line
None,
Solid Line,
Dotted Line,
Positioning Mark
Select the page boundary line, and select the [
OK
] key.
Orig. Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [
Top Edge on Top
] or [
Top Edge on
Left
]. Then select the [
OK
] key.
To Next Page
Loading...
