8-26
Setup and Registration (System Menu) > System Menu
System/Network
Configures machine system settings.
Network Setting
[
System Menu/Counter
] key > [
▲
] [
▼
] key > [
System/Network
] > [
OK
] key > [
▲
] [
▼
] key > [
Network Setting
] > [
OK
] key
Configures network settings.
Host Name
TCP/IP Settings
Item Description
Host Name
Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-42)
Item Description
TCP/IP
Set up TCP/IP to connect to the Windows network.
Value: Off, On
IPv4 Setting
Set up TCP/IP (IPv4) to connect to the network.
DHCP
Select whether or not to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP
Select whether to use Auto-IP.
Value: Off, On
IP Address
Set the IP addresses.
Value: ###.###.###.###
If DHCP is set to [
On
], this item is displayed only and cannot be entered.
Subnet Mask
Set the IP subnet masks.
Value: ###.###.###.###
If DHCP is set to [
On
], this item is displayed only and cannot be entered.
Default Gateway
Set the IP gateway addresses.
Value: ###.###.###.###
If DHCP is set to [
On
], this item is displayed only and cannot be entered.
IPv6 Setting
Select whether to use IPv6.
Value: Off, On
This setting is available when [
TCP/IP
] is [
On
].
The IPv6 settings are configured from the Command Center RX.
Command Center RX User Guide
Bonjour
Select whether or not to use Bonjour.
Value: Off, On
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
