6-11
Using Various Functions > Functions
Orig. Orientation (Original Orientation)
Select the orientation of the original document top edge to scan correct direction.
To use any of the following functions, the document's original orientation must be set.
•Duplex
• Combine
• Duplex (2-sided Original)
Select original orientation from [
Top Edge on Top
] or [
Top Edge on Left
].
• You can conveniently select in advance the size and type of paper that will be used often and set them as default.
MP Tray Set. (MP Tray Settings) (page 8-11)
• If the specified size of paper is not loaded in the paper source cassette or multi purpose tray, a confirmation screen
appears. Load the required paper in the multi purpose tray and select [
OK
] to start copying.
Item Image
Top Edge on Top
Top Edge on Left
The default setting for Original Orientation can be changed.
Original Orientation (page 8-13)
Original Original orientation
Original Original orientation
To Next Page
Loading...
Need help?
General
