6-23
Using Various Functions > Functions
Copying
Prints 1-sided originals to 2-sided, or 2-sided originals to 1-sided. Select the binding orientation for original and finished
documents.
When placing the original on the platen, consecutively replace each original and press the [
Start
] key.
After scanning all originals, select [
Finish Scan
] to start copying.
Printing
Print a document on both sides of the paper.
Item Value Description
1-sided>>1-sided
― Disables the function.
1-sided>>2-sided
― Select the [
OK
] key to copy the original with the default setting.
For the default settings, refer to the following:
Function Defaults (page 8-13)
Finish. Binding
Left/Right, Top Select [
Detail
] to display the [
Finish. Binding
] screen.
Select the binding orientation of copies, and select the [
OK
] key.
Orig. Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [
Top Edge on Top
] or [
Top Edge on
Left
]. Then select the [
OK
] key.
2-sided>>1-sided
― Select the [
OK
] key to copy the original with the default setting.
For the default settings, refer to the following:
Function Defaults (page 8-13)
Orig. Binding
Left/Right, Top Select [
Detail
] to display the [
Orig. Binding
] screen.
Select the binding orientation of originals, and select the [
OK
] key.
Orig. Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [
Top Edge on Top
] or [
Top Edge on
Left
]. Then select the [
OK
] key.
2-sided>>2-sided
― Select the [
OK
] key to copy the original with the default setting.
For the default settings, refer to the following:
Function Defaults (page 8-13)
Orig. Binding
Left/Right, Top Select [
Detail
] to display the [
Orig. Binding
] screen.
Select the binding direction of originals, and select the [
OK
] key.
Finish. Binding
Left/Right, Top Select the binding orientation of copies, and select the [
OK
] key.
Orig. Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [
Top Edge on Top
] or [
Top Edge on
Left
]. Then select the [
OK
] key.
Item Value Description
1-sided
― Disables the function.
2-sided
― Select the [
OK
] key to print a 2-sided document with the default setting.
For the default settings, refer to the following:
Function Defaults (page 8-13)
Finish. Binding
Left/Right, Top Select [
Detail
] to display the [
Finish. Binding
] screen.
Select the binding orientation of copies, and select the [
OK
] key.
To Next Page
Loading...
