10-22
Troubleshooting > Troubleshooting
R
Message Checkpoints Corrective Actions
Reference
Page
RAM disk error. ― An error has occurred on the RAM
disk. Job is canceled. Select [End].
The error cord is as follows.
04: Insufficient space on the RAM
disk. If the optional RAM disk is
installed, increase the RAM disk
size by changing RAM Disk Setting
in System Menu.
The range of RAM disk size can be
increased by selecting [Printer
Priority] in Optional Memory.
page 8-37
Removable memory
error.
Is writing to a removable memory
prohibited?
An error occurred in the removable
memory. The job stopped. Select
[End].
The error cord is as follows.
01: Connect a removable memory
that can be written to.
―
― An error occurred in the removable
memory. The job stopped. Select
[End].
The error cord is as follows.
01: The amount of data that can be
saved at once has been exceeded.
Restart the system or turn the
power OFF/ON. If the error still
occurs, the removable memory is
not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect a
compatible removable memory.
―
To Next Page
Loading...
Need help?
General
