5-32
Operation on the Machine > Handling Destination
Handling Destination
This section explains how to select and confirm the destination.
Specifying Destination
Select the destination using either of the following methods except entering address directly:
⢠Choosing from the Address Book
⢠Choosing from the External Address Book
For details on the External Address Book, refer to the following:
⢠Choosing from One Touch key.
⢠Choosing from the FAX
Choosing from the Address Book
Registering Destinations in the Address Book (page 3-20)
1
In the basic screen for sending, select the [Address Book] key.
2
Select the destinations.
1 [ā²] [ļ±] key > [Address Book] > [OK] key
2 Select the destination.
Choosing from the Address Book
(page 5-32)
Command Center RX User Guide
Choosing from the One Touch Key
(page 5-34)
FAX Operation Guide
NOTE
⢠You can set the machine up so that the address book screen appears when you select the [Send] key.
Default Screen
(page 8-36)
⢠You can specify the fax destination. Enter the other party number using the numeric keypad.
NOTE
For details on the External Address Book, refer to the following:
Command Center RX User Guide
NOTE
When checking information of the destination, select [Menu] > [Details] > [OK] key