Using Various Functions > About Functions Available on the Machine
300
[AdvancedSetup]
Allows you to configure settings such as continuous reading.
[Contrast] You can adjust the contrast between light and dark areas of the
image.
➡ Contrast (page 340)
[Erase Colors] Erases colors in the source document.
➡ Erase Colors (page 341)
Function Description
[Continuous Scan] Scans a large number of originals in separate batches and then
produces as one job.
➡ Continuous Scan (page 356)
[Job Finish Notice] Sends E-mail notice when a job is complete.
➡ Job Finish Notice (page 357)
[File Name Entry] Adds a file name.
➡ File Name Entry (page 358)
[Priority Override] Suspends the current job and gives a new job top priority.
➡ Priority Override (page 359)
[Detect Multi-fed Originals] When reading a document from the document processor, if the
multiple feeding of documents is detected, then the reading stops
automatically.
This function is available only for ECOSYS MA4000cifx and ECOSYS
MA4000cix.
➡ Detect Multi-fed Originals (page 361)
[Detect Folded Corner Orig.] When scanning a document from the document processor,
scanning is automatically stopped when a document with a folded
corner is detected.
➡ Detect Folded Corner Orig. (page 362)
[Skip Blank Page] When there are blank pages in a scanned document, this function
skips the blank pages and prints only pages that are not blank.
➡ Skip Blank Page (page 363)
[Quiet Mode] The operating sound of the machine can be suppressed.
➡ Quiet Mode (page 360)
Function Description
To Next Page
Loading...
