Using Various Functions > Functions
319
[Size Entry]
*1 For instructions on how to specify the custom paper size, refer to the following:
➡ [Custom Paper Settings] (page 427)
*2 The input units can be changed in System Menu.
➡ Measurement (page 415)
Media Type
Value
Plain, Transparency, Thin, Labels, Recycled, Preprinted
*1
, Bond, Cardstock, Color, Prepunched
*1
,
Letterhead
*1
, Thick, Envelope, Coated, High Quality, Index Tab Dividers, Custom 1 to 8
*1
*1 To print on preprinted or prepunched paper or on letterhead, refer to the following:
➡ Special Paper Action (page 431)
For instructions on how to specify the custom paper types 1 to 8, refer to the following:
➡ [Media Type Setting] (page 429)
NOTE
• You can conveniently select in advance the size and type of paper that will be used often and set them as
default.
➡ [MP Tray Settings] (page 426)
• If paper of the specified paper size is not loaded in the paper source cassette or multipurpose tray, the
confirmation screen appears. When the setting is [Auto], if the detected size of paper is not loaded, a paper
confirmation screen appears. Load the required paper in the multipurpose tray and select [Continue]. Copying
begins.
Value Description
Metric
X: 70 to 216 mm (in 1 mm increments)
Y: 140 to 356 mm (in 1 mm increments)
Enter the size not included in the standard size.
*2
If [Size Entry] is selected, use [+], [-], or the numeric
keys to set the size of "X" (width) and "Y" (length).
Inch
X: 2.76 to 8.50" (in 0.01" increments)
Y: 5.50 to 14.02" (in 0.01" increments)
To Next Page
Loading...
