7-40 Using the Operation Panel
Images are printed using a 1-to-1 correspondence between the
image file pixels and printed dots. For example, the printed size of a
600 × 300-pixel image file is 1 inch × 1/2 inch.
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
Job Name (The Job Name display settings)
Set whether the job name set in the printer driver is displayed.
1
Press while Print Settings > is displayed.
2
Press or repeatedly until >Job Name appears.
3
Press [OK]. A blinking question mark (?) appears.
4
Press or to display the job name to be used.
Off
Job Name (Use the job name set in the printer driver.)
Job No.+Job Name
Job Name+Job No.
5
When the desired job name is displayed, press [OK].
6
Press [MENU]. The display returns to Ready.
Note
Images are automatically rotated during printing to provide
a closer match between the aspect ratios of the image file and the
paper used for printing.
To Next Page
Loading...
