Maintenance 5-3
Replacing the Toner Container
This section explains how to replace the toner container.
1
Open the top cover.
2
Turn the lock lever to the unlock position. Push the lock lever to the
position marked by the arrow and pull out the toner container.
CAUTION Do not attempt to incinerate parts which contain
toner. Dangerous sparks may cause burns.
IMPORTANT During toner container replacement, temporarily move
storage media and computer supplies (such as floppy disks) away
from the toner container. This is to avoid damaging media by the
magnetism of toner.
IMPORTANT
Kyocera Document Solutions Inc.
is not liable against
any damages or problems arising from the use of toner containers other
than those designated as original Kyocera toner containers. For optimum
performance, it is also recommended to use only the Kyocera toner
containers which are specifically intended for use in your country or
region. If the toner container for another destinations is installed, the
printer will stop printing.
Note
You do not have to turn printer power off before starting
the replacement. Any data that may be processing in the printer
will be deleted if you turn the printer power off
.
Note Put the old toner container in the plastic bag (supplied
with the new toner kit) and discard it later according to the local
code or regulations for waste disposal.
To Next Page
Loading...
