4-2 Connecting and Printing
Connections
This section explains how to start up the printer.
Connecting the USB Cable
Follow the steps as below for connecting the USB cable.
1
Connect the USB cable to the USB Interface Connector.
2
Connect the other end of the USB cable to the computer's USB
interface connector.
Connecting the Network Cable
Follow the steps as below for connecting the network cable.
1
Remove the cap attached to the printer.
2
Connect the printer to the PC or your network device.
Note Use a USB cable with a rectangular Type A plug and a
square Type B plug. This cable is sold separately.
Note Use shielded interface cables. These cables are sold
separately.
To Next Page
Loading...
