Connecting and Printing 4-9
Changing Security Settings
This section explains how to change the security settings.
Access Command Center RX by referring to Accessing Command
Center RX on page 4-8.
1
From the Security Settings menu, select the setting you want to
configure. The configurable settings are Device Security, Network
Security, and Certificates.
Note The configurable settings within Device Security and
Network Security can also be configured from the machine's
System Menu.
For details, refer to the Using the Operation Panel section of
the Advanced Operation Guide.
For details on settings related to certificates, refer to the
Command Center RX User Guide.
To Next Page
Loading...
