7-86 Using the Operation Panel
Print Op Network Status Page (Printing the option network
status page)
The option network status page contains detailed information on the
network settings. This is primarily used for maintenance by service
personnel, but it contains information that may also be useful to you.
1
Press while >Service > is displayed.
2
Press or repeatedly until >>Print Op Network Status
Page appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. Processing appears and an option network
status page is printed out.
5
When printing ends, the display returns to Ready.
Print Test Page
The test page is printed to check the effectiveness of printer
adjustments. This is primarily used for maintenance by service
personnel, but it contains information that may also be useful to you.
1
Press while >Service > is displayed.
2
Press or repeatedly until >>Print Test Page appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. Processing appears and a test page is printed
out.
5
When printing ends, the display returns to Ready.
Maintenance (New Maintenance Kit replacement confirmation
setting)
This specifies the setting for confirmation of replacement with the new
Maintenance Kit (resets the total number of Maintenance Kit print
images). This is primarily used for maintenance by service personnel.
1
Press while >Service > is displayed.
2
Press or repeatedly until >>Maintenance appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. The confirmation of replacement with the new
Maintenance Kit is set.
5
When the replacement ends, the display returns to Ready.