7-5
Status/Job Cancel > Device/Communication
Device/Communication
Configure the devices/lines installed or connected to this machine or check their status.
1
Display the screen.
Select [Status], while the machine is printing or awaiting printing.
2
Check the status.
Select the items you want to check. Then, select the [OK] key to show the status of the
selected device.
The items you can check ar
e described below.
"Rmt. Op. Status"
The status of the Remote Opera
tion Status is displayed.
"Keyboard"
The status of the optional USB Keybo
ard and Bluetooth Keyboard are displayed.
"Network"
The network connection status appears.
"Wi-Fi"
• This function is displayed when the wireless network function is a
vailable on the machine.
• The Wi-Fi connection status and networ
k name (SSID) of the machine appear.
"Wi-Fi Direct"
This function is displayed when th
e wireless network function is available on the machine.
• Select [▲] [▼] key > [PushB
utton Setup] > [OK] key, and execute the push button of the
device you want to connect to start the connection to the machine.
• Select [▲] [▼] key > [Det
ail Info] > [OK] key, information on the device that is connected
by Wi-Fi Direct appears.
• Select [▲] [▼] key > [Conne
ctionStatus] > [OK] key > [Menu]> [▲] [▼] key >
[ConnectedDevices] > [OK] key to display the list of connected devices.
• Select [▲] [▼] key > [Conne
ctionStatus] > [OK] key > [Menu]> [▲] [▼] key >
[DisconnectAll] > [OK] key to disconnect all devices.
"Option Network"
The connection status of the optio
nal Network Interface Kit or Wireless Network Interface Kit is
displayed.
To Next Page
Loading...
