1-3
Legal and Safety Information > Notice
Environment
The service environmental conditions are as follows:
Avoid the following locations when selecting a site for the machin
e.
• Avoid locations near a window or with exposure to direct sunlight.
• Avoid locations with vibrations.
• Avoid locations with drastic temp
erature fluctuations.
• Avoid locations with direct ex
posure to hot or cold air.
• Avoid poorly ventilated locations.
If the floor is delicate against cast
ers, when this machine is moved after installation, the floor material may be damaged.
During printing, some ozone is rele
ased, but the amount does not cause any ill effect to one's health. If, however, the
machine is used over a long period of time in a poorly ventilated room or when making an extremely large number of
prints, the smell may become unpleasant. To maintain the appropriate environment for print work, it is suggested that the
room be properly ventilated.
Temperature 50 to 90.5 °F (10 to 32.5 °C)
Humidity 15 to 80%
To Next Page
Loading...
