8-2
Setup and Registration (System Menu) > System Menu
System Menu
Configure settings related to overall machine operation.
Select the [Me
nu] key to show the settings on the message display. Then, select from the settings displayed.
Refer to
Menu Settings on the following page and configure as needed.
Operation Method (page 2-11)
• In order to change settings that require administer privileges, you must log in with administrator privileges.
The factory default login user name an
d login password are set as shown below.
Login User Name: 6000
Login Password: 6000
• If function default settings h
ave been changed, the [Reset] key can be selected in each function screen to
immediately change the settings.
To Next Page
Loading...
