Kyocera ECOSYS P3260dn - Page 176

8-24
Setup and Registration (System Menu) > System Menu
VNC(RFB)overSSL -
Off/On Select whether to use VNC (RFB) secured by SSL.
*1, *3
Value: Off, On
NOTE
• This function is displayed when [Off/On] is set to [On].
• When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Port Number Specifies the port number used. The default port number is 9063.
*1
Value: 1 to 32767
NOTE
This function is displayed when [Off/On] is set to [On].
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
VNC (RFB) -
Off/On Select whether to use VNC (RFB).
*1
Value: Off, On
Port Number Specifies the port number used. The default port number is 9062.
*1
Value: 1 to 32767
NOTE
This function is displayed when [Off/On] is set to [On].
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disa
ble, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
Item Description