Kyocera ECOSYS P3260dn - Page 50

2-17
Installing and Setting up the Machine > Network Setup
When setting the static IP address
1 [▲]
[] key > [DHCP] > [OK] key > [▲] [] key > [Off] > [OK] key
2 [▲]
[] key > [IP Address] > [OK] key
3 Se
t the IP address.
4 Se
lect the [OK] key.
5 [▲]
[] key > [Subnet Mask] > [OK] key
6 Se
t the subnet mask.
7 Se
lect the [OK] key.
8 [▲]
[] key > [Default Gateway] > [OK] key
9 Se
t the default gateway.
10Se
lect the [OK] key.
11[▲]
[] key > [Auto-IP] > [OK] key
12[Of
f] > [OK] key
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, wh
ich is shown highlighted.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, wh
ich is shown highlighted.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, wh
ich is shown highlighted.