1-4-7
FS-9120DN/9520DN
Service items Description
Item Description
1 Engine mask version/Engine software version
2 Operator panel mask version
3 BROM version
4 Software jumper switch information First byte
(Hexadecimal) Bit 0: always 0
Bit 1: 0: Overseas 1: Domestic (Japan)
Bit 2: Not used
Bit 3: Not used
Bit 4: 0: Kyocera 1: OEM
Bit 5: 0: For Europe 1: For U.S.
Bit 6: 0 Non MICR mode 1: MICR mode
Bit 7: Not used
Second byte
OEM information: Displayed in OEM mode only.
5 Firmware version
6 Firmware release date
7 Total page counter
8 Drum serial number
9 Machine serial number
0 Paper Jam Log #: Log number
1 to 16 (If the number of jams exceeds 16, the oldest log is
deleted.)
Count.: Number of pages
Total page counter at the time of jam
Event: Log code
Six types of two-digit hexadecimal numbers are displayed.
Cause of jam/jam position/paper feed location/paper size/
media type/ejection location
! Service Call Log #: Log number
1 to 8 (If the number of service calls exceeds 8, the oldest
log is deleted.)
Count.: Number of pages
Total page counter at the time of service call
Service code: Log code
@ Maintenance Log #: Log number
1 to 8 (If the number of replacement times exceeds 8, the
oldest log is deleted.)
Count.: Number of pages
Total page counter at the time of replacement
Item: Log code
Two units of 1-byte values indicate a log.
First byte 00: Replacement of toner; 01: Replacement of MT
Second byte 00 (fixed)
# Counter Log Jam count
Counter display by cause of jam
Call system log
Counter display by service call
Replacement log
Replacement log display by item
T: Toner/M: Maintenance kit
To Next Page
Loading...
Need help?
General
