Kyocera FS-C2026MFP

Basic Operation
3-26
Send as E-mail
Sends a scanned original image as an E-mail attachment.
Part that is operated
NOTE:
• You must have a network environment in which this machine can connect to a mail server. It is
recommended that the machine be used in an environment in which it can connect to the mail server at any
time over a LAN.
• Access the COMMAND CENTER beforehand and specify the settings required for sending e-mail. For
details, see COMMAND CENTER (Settings for E-mail)
on page 2-23.
• Refer to Character Entry Method on Appendix-7 for details on entering characters.
1 Press the Send key.
Displays the screen for sending.
2 Press the U or V key to select [E-mail].
3 Press the OK key. Address Entry appears.
Send to: a b
*********************
2 G Folder(SMB)
3 H Folder(FTP)
1 p E-mail
Address Entry: B b
*
ABC
[ Text ]