Kyocera FS-C2026MFP

Preparation before Use
2-10
Switching the Language for Display [Language]
Select the language displayed on the Message Display.
Use the procedure below to select the language.
1 Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in.
NOTE: The default settings of the Login User Name
and Login Password are both "2600".
If user management is selected in [Network Setting],
press [Menu] (the Left Select key) to authenticate.
Refer to Character Entry Method on Appendix-7
for
details on entering characters.
2 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
3 Press the OK key. The Common Settings menu
appears.
4 Press the U or V key to select [Language].
5 Press the OK key. Language appears.
6 Press the U or V key to select the desired
language and then press the OK key.
Completed. is displayed and the screen returns to
the Common Settings menu.
Login User Name: L b
********************
Login Password:
[ Menu ] [ Login ]
Sys. Menu/Count.: a b
5 User Property
*********************
7 Copy
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Language: a b
*********************
2 Deutsch
3 Français
1 *English