Kyocera FS-C2026MFP

Preparation before Use
2-16
10 Press the U or V key to select [IPv4 Setting].
11 Press the OK key. The IPv4 Setting menu appears.
12 Press the U or V key to select [DHCP].
13 Press the OK key. DHCP appears.
14 Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the IPv4 Setting menu.
15 Press the U or V key to select [Auto-IP].
16 Press the OK key. Auto-IP appears.
17 Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the IPv4 Setting menu.
TCP/IP Settings: a b
1 TCP/IP
*********************
3 IPv6 Setting
[ Exit ]
2 IPv4 Setting
IPv4 Setting: a b
*********************
2 Bonjour
3 Auto-IP
[ Exit ]
1 DHCP
DHCP: a b
1 Off
*********************
2 *On
IPv4 Setting: a b
1 DHCP
2 Bonjour
*********************
[ Exit ]
3 Auto-IP
Auto-IP: a b
1 Off
*********************
2 *On