Kyocera FS-C2026MFP

Default Setting (System Menu)
8-117
8
Date/Timer
Date/Timer settings include:
• Date/Time
…8-117
• Date Format …8-119
•Time Zone …8-120
• Summer Time …8-121
• Auto Error Clear …8-122
•Sleep Timer …8-125
• Sleep Level …8-126
• Auto Panel Reset …8-128
• Unusable Time …8-130
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and
time set here will be displayed on the header.
CAUTION: Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Date Setting], and
press the OK key.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language