Kyocera FS-C2026MFP

Preparation before Use
2-20
21 Press the U or V key to select [IP Address].
22 Press the OK key. IP Address appears.
23 Use the arrow keys to enter the IP address.
Press the Y or Z key to move the cursor position
horizontally.
Press the U or V key or the numeric keys to enter
the IP Address. Each 3 digits can be set between
000 and 255.
IMPORTANT: When the DHCP Setting (page 2-14) is
[On], the current IP address is displayed and cannot be
changed.
When setting an IP address, set the DHCP Setting
(page 2-14) to Off.
24 Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
25 Press the U or V key to select [Subnet Mask].
26 Press the OK key. Subnet Mask appears.
27 Use the arrow keys to enter the Subnet Mask.
IPv4 Setting: a b
2 Bonjour
3 Auto-IP
*********************
[ Exit ]
4 IP Address
IP Address: a b
123.145.167.
189
IP Address: b
123.145.167.189
IPv4 Setting: a b
3 IP Address
*********************
5 Default Gateway
[ Exit ]
4 Subnet Mask
Subnet Mask: a b
123.145.167.
189