Kyocera FS-C2026MFP

Default Setting (System Menu)
8-75
8
• Sharpness
• Backgrnd Density
Use the procedure below to set Select Key Set.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Document Box].
2 Press the OK key. The Document Box menu
appears.
3 Press the U or V key to select [Select Key Set.].
4 Press the OK key. Select Key Set. appears.
5 Press the U or V key to select [Print] or [Store].
6 Press the OK key. This displays the flexible key
selection screen for the function selected in step 5.
The screen shown is the one when [Print] is
selected.
7 Press the U or V key to select [Left] or [Right].
8 Press the OK key. This displays the function
selection screen for the flexible key selected in
step 7. The screen shown is the one when [Left] is
selected.
9 Press the U or V key to select the function you
want to register to the flexible key.
Sys. Menu/Count.: a b
*********************
< Edit Destination
= Adjust/Maint.
[ Exit ]
; Document Box
Document Box: a b
*********************
2 Select Key Set.
3 Polling Box
[ Exit ]
1 Sub Address Box
Select Key Set.: a b
*********************
2 Store
[ Exit ]
1 Print
Print: a b
*********************
2 Right
[ Exit ]
1 Left
Left: a b
*********************
2 Collate
3 Paper Selection
1 None