Kyocera FS-C2026MFP

Default Setting (System Menu)
8-60
6 Press the OK key. A confirmation screen appears.
7 Press [Yes] (the Left Select key). The machine is
restarted.
RAM Disk Mode
When optional memory is installed, a RAM disk can be created and its size can be set. Creating a RAM disk
makes it possible to print from a Job Box.
The procedure for setting the RAM Disk Mode is explained below.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [RAM Disk Mode].
4 Press the OK key. RAM Disk Mode appears.
5 Press the U or V key to select [Off] or [On].
6 Press the OK key. If [Off] is selected, Completed.
appears and you return to the Common Settings
menu. If [On] is selected, the RAM disk size screen
appears.
Restart.
Are you sure?
[ Yes ] [ No ]
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
RAM Disk Mode: a b
*********************
2 On
1 *Off
RAM Disk Mode: D b
(1 - 512)
**216* MB