Kyocera FS-C2026MFP

Default Setting (System Menu)
8-65
8
4 Press the OK key. AutoPaperSelect. appears.
5 Press the U or V key to select [MostSuitableSize]
or [Same as OrigSize].
6 Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
Auto % Priority
When a paper source of different size from the original is selected, select whether automatic zoom (reduce/
zoom) is performed.
The table below shows the available settings. The default setting is Off.
Use the procedure below to specify the automatic zoom priority.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Copy].
2 Press the OK key. The Copy menu appears.
3 Press the U or V key to select [Auto % Priority].
AutoPaperSelect.: a b
*********************
2 Same as OrigSize
1 *MostSuitableSize
Item Detail
Off No zoom performed (copied in original size).
On Automatic zoom performed as appropriate.
Sys. Menu/Count.: a b
*********************
8 Printer
9 Send
[ Exit ]
7 Copy
Copy: a b
*********************
2 Paper Selection
3 AutoPaperSelect.
[ Exit ]
1 Photo Processing