Kyocera FS-C2026MFP

Default Setting (System Menu)
8-158
Use the procedure below.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the U or V key to select [Network Setting].
IPP Select whether or not to use
IPP, and the number of the
port to be used.
Off
Port number:
631
z
IPP over SSL Select whether or not to use
IPP over SSL.
SSL must be set to [On] in
SSL Setting on page 8-160
.
On z
ThinPrint Select whether or not to use
ThinPrint.
Off ×
ThinPrintOverSSL Select whether or not to use
ThinPrintOverSSL.
SSL must be set to [On] in
SSL Setting on page 8-160
.
Off z
* z: The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Item Description Default Setting
Restarting the
System*
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting