Kyocera FS-C2026MFP

Default Setting (System Menu)
8-163
8
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System menu appears.
3 Press the U or V key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the U or V key to select [HTTP Security].
8 Press the OK key. HTTP Security appears.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Network Setting: a b
*********************
8 Host Name
9 LAN Interface
[ Exit ]
7 Secure Protocol
Secure Protocol: a b
1 SSL
2 IPP Security
*********************
[ Exit ]
3 HTTP Security
HTTP Security: a b
1 HTTP/HTTPS
*********************
2 *HTTPS only