Kyocera FS-C2026MFP - Page 476

Management
11-24
3 Press the OK key. The Job Account. Set. menu
appears.
4 Press the U or V key to select [Default Setting].
5 Press the OK key. The Default Setting menu
appears.
6 Press the U or V key to select [Apply Limit].
7 Press the OK key. Apply Limit appears.
8 Press the U or V key to select [Immediately],
[Subsequently] or [Alert Only].
9 Press the OK key.
Completed. is displayed and the screen returns to
the Default Setting menu.
Job Account.Set.: a b
4 Each Job Account
5 Account. List
*********************
[ Exit ]
6 Default Setting
Default Setting: a b
*********************
2 Copy/Print Count
3 Counter Limit
[ Exit ]
1 Apply Limit
Apply Limit: a b
1 Immediately
*********************
3 Alert Only
[ Exit ]
2 *Subsequently