Kyocera FS FS-1020D User Manual

Print Quality Problems
3-5
Characters out of position. Check the file or program.
Check whether the problem is being caused by a
PRESCRIBE command error. If the problem occurs only
with a specific file or program, the most likely cause is an
error in a parameter to a command or command syntax.
Check the paper size setting.
Check that the paper size set in the paper source and the
paper size set on the KM-NET for Clients are the same.
(See the KM-NET for Clients Operation Guide.)
Printed Results Corrective Action
Table 3-2 (Continued)

Kyocera FS FS-1020D Specifications

General

Print Technology	Laser
Resolution	600 x 600 dpi
Memory	32 MB
Standard Input Capacity	250 sheets
Connectivity	USB 2.0
Print Speed	20 ppm
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Operating System Compatibility	Windows, Mac, Linux
Warm-up Time	Less than 15 seconds
Time to First Page	Less than 10 seconds