viii
Guide to the Manuals
• For information on how to install the printer driver software, refer to
the KX Printer Driver Installation Guide that is included with the
printer.
• For information on how to use the printer driver software, refer to the
KX Printer Driver Operation Guide that is included on the Kyocera
Mita Document Library CD-ROM.
Item Description
Installation Guide
(paper manual)
Describes procedures from printer setup to printing a
test page.
KX Printer Driver
Installation Guide
(paper manual)
Describes the procedure to install the printer
driver software.
Operation Guide
(this manual)
Guides you through topics concerning the operations
and maintenance of the printer.
KX Printer Drivers
Operation Guide
Describes how to install and set the printer driver.
PRESCRIBE Command
Technical Reference
PRESCRIBE is the native language of the Kyocera
Mita printers. This Technical Reference contains the
information about how the printing is performed using
the PRESCRIBE commands as well as the font and
emulation description. Also included is a list of
permanent parameters and their explanation needed
when customizing your printer.
PRESCRIBE Command
Reference
Gives a detailed explanation of the PRESCRIBE
command syntax and parameters with the aid of print
examples.
Note
To Next Page
Loading...
Need help?
General
