Kyocera FS FS-1020D User Manual

Cleaning the Printer
2-6
2.2 Cleaning the Printer
To avoid print quality problems, the interior of the printer must be cleaned
with every toner container replacement.
Cleaning should be done from time to time to avoid print quality
problems.
2.2.1 Printer Interior
To avoid print quality problems due to paper dust and debris, clean the
interior of the printer in the following manner.
1
Open the printer’s top and front covers.
Figure 2-8
2
Lift the process unit together with the toner container out of the
printer.
The drum in the process unit is sensitive to light. Never expose the drum
even to normal office lighting (500 lux) for more than five minutes.
Figure 2-9
Note
Top Cover
Front Cover
Note
Process Unit

Kyocera FS FS-1020D Specifications

General

Print Technology	Laser
Resolution	600 x 600 dpi
Memory	32 MB
Standard Input Capacity	250 sheets
Connectivity	USB 2.0
Print Speed	20 ppm
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Operating System Compatibility	Windows, Mac, Linux
Warm-up Time	Less than 15 seconds
Time to First Page	Less than 10 seconds