Kyocera FS FS-1020D User Manual

Indicators
3-13
None The printer has halted because you attempted to insert/
remove a memory card into/from the printer slot while the
printer power is on.
Turn the power switch off and then on to restart the printer.
Make sure to turn the printer power off before inserting/
removing a memory card.
None Format error
Memory card
This message appears when the printer is in the ready
state and the memory card is not formatted, and therefore
cannot be read or written.
Format the memory card.
Indicator KM-NET for
Clients display
Corrective Action
Table 3-5 (Continued)
Note

Kyocera FS FS-1020D Specifications

General

Print Technology	Laser
Resolution	600 x 600 dpi
Memory	32 MB
Standard Input Capacity	250 sheets
Connectivity	USB 2.0
Print Speed	20 ppm
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Operating System Compatibility	Windows, Mac, Linux
Warm-up Time	Less than 15 seconds
Time to First Page	Less than 10 seconds