Kyocera FS FS-1020D User Manual

Expansion Memory Installation
A-5
After removing the side cover, you can see the DIMM socket on top of
the main circuit board.
Figure A-8
4
Remove the DIMM from its package.
5
Open the clips on both ends of the DIMM socket.
Figure A-9
6
Insert the DIMM into the DIMM socket so that the notches on the
DIMM align with the corresponding protrusions in the slot.
Figure A-10
DIMM socket
Clips
DIMM

Kyocera FS FS-1020D Specifications

General

Print Technology	Laser
Resolution	600 x 600 dpi
Memory	32 MB
Standard Input Capacity	250 sheets
Connectivity	USB 2.0
Print Speed	20 ppm
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Operating System Compatibility	Windows, Mac, Linux
Warm-up Time	Less than 15 seconds
Time to First Page	Less than 10 seconds