2HA/2HB
1-3-42
U260
Changing the copy count timing
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user (copy service provider) request. If a paper jam occurs frequently in the eject sec-
tion when the number of copies is counted at the time of paper ejection, copies are provided without copy
counts. The copy service provider cannot charge for such copying. To prevent this, the copy timing should be
made earlier. If a paper jam occurs frequently in the paper conveying or fuser sections when the number of
copies is counted before the paper reaches those sections, copying is charged without a copy being made. To
prevent this, the copy timing should be made later.
Method
Press the start key.
Setting
1. Select the copy count timing using the zoom +/- keys.
Initial setting: EJE
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U265
Setting the destination specifications
Description
Sets whether or not to print the product name on the reports that users print.
Purpose
To be set according to user request.
Method
Press the start key.
Setting
1. Enter "0" or "2" using the zoom +/- keys.
Initial setting: 0
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U277
Setting auto application change time
Description
Sets the time that passes until the machine starts automatically printing after completing copying or operation
when the machine is used as a printer.
Purpose
According to user request, changes the setting.
Method
Press the start key.
Setting
1. Change the setting using the zoom +/- keys.
The setting can be changed by 30 s per step.
2. Press the start key. The value is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
Display Description
FEd When secondary paper feed starts
EJE When the paper is ejected
Setting Description
0 Product name printed
2 Product name not printed
Description Setting range Initial setting
Switching time 30 to 270 (s) 30
To Next Page
Loading...
