Kyocera KM-1635 - System Setting

2HA/2HB
1-3-41
U253
Switching between double and single counts
Description
Switches the count system for the total counter and other counters.
Purpose
According to user (copy service provider) request, select if A3/11" x 17" paper is to be counted as one sheet
(single count) or two sheets (double count).
Method
Press the start key.
Setting
1. Select the item using the zoom +/- keys.
Initial setting: -A3
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U254
Turning auto start function on/off
Description
Selects if the auto start function is turned on.
Purpose
Normally no change is necessary. If incorrect operation occurs, turn the function off: this may solve the prob-
lem.
Method
Press the start key.
Setting
1. Select either "on" or "oFF" using the zoom +/- keys.
Initial setting: on
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U258
Switching copy operation at toner empty detection
Description
Selects if continuous copying is enabled after toner empty is detected.
Method
Press the start key.
Setting
1. Select single or continuous copying using the zoom +/- keys.
Initial setting: Sin
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Maintenance
item No.
Description
Display Description
Sin Single count for all size paper
-b4 Double count for B4 size or larger
-A3 Double count for A3/11" x 17" paper only
Display Description
on Auto start function on
oFF Auto start function off
Display Description
Sin Enables only single copying.
Con Enables single and continuous copying.