To Next Page
R
Randy RoseSep 12, 2025
How to improve copy clarity on Kyocera Copier?
- EEdward IbarraSep 12, 2025
If your Kyocera Copier is not producing clear copies, select the appropriate Image Quality Mode.
How to improve copy clarity on Kyocera Copier?
If your Kyocera Copier is not producing clear copies, select the appropriate Image Quality Mode.
Why are the copies skewed on my Kyocera Copier?
If copies from your Kyocera Copier are skewed, ensure the original is correctly set against the Original Size Indicator Plate on the platen or correctly aligned with the original insertion guide in the optional Document Processor. Also, check the position of the Width Guide in the cassette.
Why is my Kyocera Copier making dark copies?
If the Kyocera Copier produces dark copies, perform the “Auto Exposure Adjustment” or use Exposure Adjustment to set the proper exposure. You can also perform the Manual Exposure Adjustment in each original mode.
Why is my Kyocera Copier making light copies?
If the Kyocera Copier produces light copies, there are several possible causes and solutions: * If the copier is in Auto Exposure Mode, perform the “Auto Exposure Adjustment.” * If the copier is in Manual Exposure Mode, use Exposure Adjustment to set the proper exposure. * If the toner in the toner container is caked, shake the Toner Container left and right for approximately 10 times. * If the Add Toner Indicator is lit, replace the Toner Container. * If the paper is damp, replace the paper with new paper. * If the electrical charge section is dirty, open the front cover and use the Cleaning Rod to clean the electrical charge section.
How to use Kyocera Copier when Job Accounting is set?
If your Kyocera Copier is in Job Accounting mode, use the numeric keys to enter the assigned Section Code to perform copying. After copying, press [Job Accounting] to display “= = =” again.
How to fix 'Add toner' message on Kyocera Copier?
If the Kyocera Copier shows 'Add toner' message, replace the toner container with a new one.
What to do if Kyocera Copier displays 'Memory is full. Cannot continue'?
If the Kyocera Copier shows 'Memory is full. Cannot continue,' press [Stop/Clear], then press [Interrupt] again after the data is deleted to exit Interrupt Copying. Once the interrupted copy is complete, repeat the procedure.
How to resolve 'Close document processor' message on Kyocera Copier?
If the Kyocera Copier displays 'Close document processor', ensure that the Document Processor is completely closed.
What to do if Kyocera Copier says 'Close document processor cover'?
If the Kyocera Copier displays 'Close document processor cover', close the left cover and then the front cover.
How to fix 'Close front cover' error on Kyocera Copier?
If the Kyocera Copier displays 'Close front cover', ensure that the front cover is completely closed.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Technology | Laser |
| Print Speed | 16 ppm |
| Max Print Resolution | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Max Copy Resolution | 600 x 600 dpi |
| Scan Type | Flatbed |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Max Paper Size | A3 |
| Duplex Printing | Manual |
| Interface | USB 2.0 |
| Memory | 32 MB |
| Supported Operating Systems | Windows, Mac OS |
| Type | All-in-One Printer |
| Zoom Range | 50% - 200% |
Identifies the main physical components of the copier.
Details the controls and indicators on the copier's control panel.
Explains the messages shown on the copier's operational display.
Instructions for correctly loading paper into the copier's trays.
Step-by-step guide for performing a standard copy operation.
How to enlarge or reduce copies using zoom functions.
Procedure for temporarily pausing a copy job to perform another.
Explains the copier's low power saving state.
Describes the copier's automatic sleep function for energy saving.
Guide to creating two-sided copies from different original types.
Instructions for copying multiple originals onto separate sheets.
How to add a binding margin to copies for easier binding.
Methods to erase blemishes from the edges of copies.
How to combine multiple originals onto one sheet.
Procedure for automatically collating multiple sets of copies.
Explains the EcoPrint function to reduce toner consumption.
How to register and use frequently used copy settings.
Introduction to the copier's system menu for configuration.
Lists and describes various configurable settings available in the system menu.
Steps for navigating and operating the copier's system menu.
How to modify the copier's default operational settings.
How to view the total number of copies made by the copier.
Explains the job accounting feature for managing copier usage by department.
Procedure for registering department identification codes.
How to reset the job accounting counts for all departments.
Details the functionality and usage of the optional document processor.
Information about the optional paper feeder unit.
Information about the optional duplex unit for two-sided copying.
Information about the optional key counter for usage tracking.
Instructions for cleaning various parts of the copier.
Guide for replacing the toner and waste toner components.
Common issues and their corrective procedures not covered elsewhere.
Explains error messages and required actions.
Steps to resolve paper jam issues in different locations.
