Kyocera KM-1650

System Settings
3-22 ADVANCED OPERATION GUIDE
NOTE: This item is displayed only if the optional Finisher or Job
Separator is installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Copy
Otput Destn and press [Enter].
3
Press S or T to select the output
destination required and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Fax Output Destination
Use to set the paper output destination with priority for received fax data
and various reports.
NOTE: This item is displayed only if the optional Fax kit and Finisher or
Job Separator are installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Fax
Output Destn and press [Enter].
3
Press S or T to select the output
destination required and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Machine Default:
Copy Otput Destn Top Tray:
:
Low Power Time :
Sleep Mode Time 30Min.
15Min.
Copy Output Destination:
Top Tray
Finisher
*
Setting Item Output Destination
Top Tray Main body output tray
Finisher Optional Finisher
Job Separator Optional Job Separator
Machine Default:
Fax Output Destn Top Tray:
Copy Otput Destn Top Tray:
Low Power Time :30Min.
Fax Output Destination:
Top Tray
Finisher
*