Kyocera KM-1650 Advanced Operation Guide

System Settings
ADVANCED OPERATION GUIDE 3-9
Exposure Adjustment for Text + Photo Originals
Adjusts the density of the central value in Manual Exposure mode for Text
+ Photo originals.
1
Display the Copy Default screen, refer to Access the Copy Default Screen,
on page 3-3.
2
Press S or T to select Txt+Photo
Dens and press [Enter].
3
Press < or > to adjust the
exposure. Move right to darken
the density, or left to lighten it and
press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Exposure Adjustment for Text Originals
Adjusts the density of the central value in Manual Exposure mode for Text
originals.
1
Display the Copy Default screen, refer to Access the Copy Default Screen,
on page 3-3.
2
Press S or T to select Txt Ori
Density and press [Enter].
3
Press < or > to adjust the
exposure. Move right to darken
the density, or left to lighten it and
press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Default Magnif.
Adj. Auto expos.
Txt+Photo Dens.
Copy Default:
4
:
:
100%
4:
Text+Photo Orig. Dens. Adj.:
Auto expos.(OCR)
Txt+Photo Dens.
Txt Ori Density
Copy Default:
4:
4:
4:
Text Original Density Adjust:

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)