Kyocera KM-1650 - What Utilities are Included with this Product?

System Settings
3-16 ADVANCED OPERATION GUIDE
Auto Cassette Switching
If multiple cassettes contain the same size paper and the paper in one
cassette runs out during copying, the Automatic Cassette Switching
function will switch paper feed from the empty cassette to another cassette
containing paper of the same size and orientation.
To prohibit switching to a cassette that has a different paper type, select
On/Only Same Paper Type.
NOTE: To use this function on the 16 ppm model, the Optional Paper
Feeder must be installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Auto
Cassette SW and press [Enter].
3
Press S or T to select On/All
types of paper, On/Only same
paper type, or Off and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Paper Size (cassettes 1 to 4)
Use to set the paper sizes for cassettes 1 to 4. To detect the paper size
automatically, set to Auto Detection Metric or Auto Detection Inch.
NOTE: For the 16 ppm model, cassettes 2 to 4 are included in the
optional paper feeder. For the 20 and 25 ppm model, cassettes 3 and 4
are included in the optional Paper Feeder. This setting is displayed only if
the optional Paper Feeder is installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
A Paper Size option is available
for each cassette. Press S or T
to select the Paper Size option
required, and press [Enter].
3
Press S or T to select Auto
Detection Metric, Auto Detection
Inch or a paper size and press
[Enter].
End
Auto Cassette SW
Machine Default:
Paper Size(1st)
On
Auto I
:
:
Automatic Cassette Switching:
Off
On/All types of paper
*
On/Only same paper type
End
Auto Cassette SW
Machine Default:
Paper Size(1st)
On
Auto I
:
:
Paper Size (1st cassette):
Auto Detection Metric
Auto Detection Inch
*