Kyocera KM-1650 Advanced Operation Guide

System Settings
ADVANCED OPERATION GUIDE 3-23
Default Operation Mode
Select the default screen to be displayed when the power is switched on.
The Copy or Fax screen can be displayed.
NOTE: This item is displayed only if the optional Fax kit is installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Main
mode and press [Enter].
3
Press S or T to select Copy
mode or Fax mode and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Key Sound
Use to enable a beep sound each time a key on the Operation Panel is
pressed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Key sound
On/Off and press [Enter].
3
Press S or T to select Off or On
and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Main Mode Copy:
Machine Default:
Fax Output Destn Top Tray:
Copy Otput Destn Top Tray:
Select the Main Mode:
Copy Mode
Fax Mode
*
Key Sound On/Off On:
Machine Default:
:
Low Power Time :
Sleep Mode Time 30Min.
15Min.
Key Sound On/Off:
Off
On
*

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)