Kyocera KM-1650 Advanced Operation Guide

Printer Settings
2-32 ADVANCED OPERATION GUIDE
EcoPrint
EcoPrint mode allows printing with less toner consumption. Use this mode
when high quality printing is not necessary, for example, for draft printing.
1
Display the Print Quality screen, refer to Access the Print Quality Screen,
on page 2-31.
2
Press S or T to select EcoPrint
Mode and press [Enter].
3
Press S or T to select On or Off
and press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
Resolution
With this machine, three types of resolution are available: 300 dpi, 600 dpi,
and Fast 1200 Mode.
1
Display the Print Quality screen, refer to Access the Print Quality Screen,
on page 2-31.
2
Press S or T to select Resolution
and press [Enter].
3
Press S or T to select Fast 1200
Mode, 600 dpi or 300 dpi and
press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
Back
KIR Mode
Print Quality
EcoPrint Mode
Back
On
EcoPrint Mode
Off
Print Quality
Print Quality
EcoPrint Mode
Resolution
Back
Fast1200 Mode
Resolution
600dpi

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)