Kyocera KM-1820

Installation Windows Vista - Network Connection
1-5 KX Driver
2
In the Custom Installation page, ensure that the KX Driver is selected as the
product. If you intend to use the scanner, also check that the scanner driver is
selected. To install fonts or utilities, click the Utility tab, and select from the options
there. When you are finished selecting items for installation, click Next. 2
3
The Discover Printing System page appears. 3
Select your printing system from the list, which should show a Type of USB for a USB
cable, or LPT (local port) for a parallel cable. Click Next, then go to step 7.
If Discovery does not find your printing system, a message box appears. Ensure that
your printer is properly connected by the correct cable and is powered on, and then
close the message box and retry Discovery.
- OR -
To manually select your printing system and port, select Custom select, and then
click Next.
4
In the Printer Port page, select the port connected to your printing system. 4
• For a USB connection, the Port Name should begin with USB, and the
Description should read Virtual printer port for USB.
• For a parallel connection, the Port Name should begin with LPT, and the
Description should read Local Port.
Click Next.
5
The Printing System page appears. From the list, select the printing system to
install, and then click Next. For a USB connection, go to step 7. For a LPT
connection, go to step 6. 5
6
In Printer Settings, you can assign a name to the printing system. This name
appears in Windows Printers and Faxes and in printer lists in applications. Here
you can also choose to share this printer with others, or set this printer as the default
printer. Make your selections, and then click Next. 6
7
In the Confirm Settings page, click Install if the settings are correct. If settings are
not correct, click Cancel and restart the installation. 7
The Installation Wizard page appears with this message: Installation Completed.
Select Print a test page if you want to verify that the printing system is printing
correctly. Click Finish to exit the Printer Installation Wizard and return to the CD-
ROM main menu.
The installation of the printer is now complete. If prompted, restart your system.
Windows Vista - Network Connection
1
Ensure that the printing system is powered on and connected to the network. In the
Installation Method page, select Custom Installation. Click Next. 1
2
In the Custom Installation page, ensure that the KX Driver is selected as the
product. To install fonts or utilities, click the Utility tab, and select from the options
there. When you are finished selecting items for installation, click Next. 2
3
The Discover Printing System page appears. 3