Kyocera KM-1820

Advanced
User Guide 7-10
When printing is specified for the first page under Page Selection and Front outside
is selected In the Publishing tab, Print onto front outside cover is automatically
selected by the driver. (Even though the check box shows as selected, the option is
disabled.)
If you want, in the Publishing tab you can also select different media for the covers
than that used for the rest of the print job. For more details on Cover mode, see the
Publishing chapter.
Add Security Watermark
You can create your own custom security watermarks with different fonts, styles,
colors, sizes and angles. You can also make changes to the footer, footer position,
background pattern, pattern shading, and text contrast. A maximum of 26 security
watermarks can be added (in addition to the existing standard security watermarks).
Note: The Add button is unavailable when the number of security watermarks
reaches the maximum of 30. You must delete items to make the Add button
available again.
1
Click Add to open the Add Security Watermark dialog box. 1
2
Type a descriptive name for your watermark in the Security watermark name text
box. The name can be different from the actual watermark text, but the name cannot
be the same as one of the standard security watermark names. After the new
watermark is added, its name appears in the Select security watermark drop-down
list. 2
If you type the same name as a previously added security watermark, when you try
to add the new watermark the driver prompts you for a decision to replace the one
that already exists. Click Yes to replace the existing security watermark with the new
one, or click No to cancel the Add action.
If you do not type a name, and the name text box is left blank, the driver prompts you
to type a name. A security watermark cannot be saved with a blank name.
3
Up to three lines of text can be printed as a security watermark. Though the text lines
(Line 1, Line 2, Line 3) are all optional, at least one of the lines must contain text.3
To leave a text line blank, select [None] from that line’s drop-down list.
With User Defined selected from the Line text drop-down list, type the text you want
in the text box next to the drop-down list. The maximum length of each line of text is
39 characters. As you type, your text appears in the preview pane at the left.
As an alternative to creating your own security watermark text, you can choose one
of the following selections from the list. These options direct the printing system to
retrieve information from the computer or printer driver to print the security
watermark:
For date, time, and job selections, only a label for the selection appears in the
preview panel. When the job is printed, the actual date, time or job information prints
as the security watermark text.
• Computer name • Mac address • Time
• Date and time • User name • IP address
• Job name • Date • Job ID