Kyocera KM-1820

Printing Basics
User Guide 3-4
1
Load the paper in a paper cassette or the MP tray. 1
Note: Use the MP tray in cassette mode (the default). For further details on media
types and MP tray modes, refer to the printing system's Operation Guide.
2
In the print application, select File > Print. 2
3
In the Print dialog box, click Properties. 3
4
Select the document paper size from the Print Size list. 4
5
From the Media type list, select the type of media for printing, then click OK. 5
After printing begins, the printing system automatically selects the paper to match the
paper size and specified media type.
Printing on Paper of Non-Standard Sizes
To use custom sizes of paper in your printing system, you must first define the
custom paper sizes in the Properties dialog box.
Note: For custom paper, supply the paper using the universal (adjustable) paper
cassette or the MP tray.
Custom Paper Sizes
1
Load the custom paper into the printing system. For further details, refer to the
printing system's Operation Guide. 1
2
In the print application, select File > Print. 2
3
In the Print dialog box, click Properties. 3
4
Click Page Sizes. The Page Sizes dialog box appears. 4
5
Click New to display Custom_01 in the Name box. You can replace Custom_01
with the name for your new custom paper size. The name can be up to 31
characters. 5
6
Type the measurements in the Height and Width boxes in millimeters or inches. The
unit (inches or millimeters) is selected in the User Settings dialog box, accessed
from the Device Settings tab. For further details on changing the unit, refer to User
Settings on page 2-7. For custom paper size dimensions, refer to the printing
system’s Operation Guide
. 6
7
Click OK to return to the Basic tab. 7
8
To add more custom paper sizes, repeat the steps above (Maximum 20 custom
paper sizes).